Energy Control with Brown
Check Your Energy Savings. Particularly Effectively After Building / Home Modernization
After modernizing a house, you should know whether your energy consumption has actually been minimized. The savings can be measured. The oil meters offer optimal oil consumption control, ideally before modernization, so that you can make an exact comparison afterwards.
When using an alternative energy source in addition to your heating system, you have an optimal comparison of the consumption values before / after. Your energy savings are made measurable with Braun oil meters.
Controlling your consumption is no problem with the easy handling of these oil meters. Save where it counts. Take advantage of the opportunity to determine at time of purchase what your oil requirement are and the price you should pay. Unlike other energy sources, where the price is dictated. BRAUN Oil Meter – an ideal addition to your heating system!
Oil Meter
Installation Option for Oil Meter HZ 3
One pipe system (oil central heating)
ZÖV (central oil supply)
Installation options for the oil meters HZ 5 DR and HZ 6 DR
Two-pipe system
Installation in the pressure line:
Single pipe system
Installation in the suction line:
Installation in the pressure line:
Oil Meter HZ 3
For central oil supply – oil stoves – measuring range 0.18… 12 l / h – burner output 1.65… 275 kW
Oil Meter HZ 3
The HZ 3 oil meter can be used as a measuring device for EL fuel oil and diesel fuel. Even the smallest quantities can be measured with the greatest accuracy, you simply read off your oil consumption. The calibrated oil meter (calibration is valid for ten years) permits accurate consumption calculations and is moreover extremely robust with a long service life. The HZ 3 oil meter can also be supplied if desired with calibration which is valid throughout the EU.
| HZ 3 | Factory tested version | Prod.-No. 89 320 010 |
| HZ 3 | EC Construction-Certified version | Prod.-No. 89 320 012 |
Accessories HZ 3 Models
Straight screw connection (steel, cylindrical, galvanized)
| R 1/4″ x 8 mm | Prod.-No.03 008 321 |
| R 1/4″ x 10 mm | Prod.-No. 03 008 322 |
| R 1/4″ x 12 mm | Prod.-No. 03 008 323 |
Oil Meter HZ 5 DR
For oil central heating – measuring range 0.7… 40 l / h – burner output 7… 400 kW
Oil meter HZ 5 DR
“Version with roller counter and pulse output”
Oil meter HZ 5 DR with LCD digital display and built-in potential-free reed contact as “pulse generator”. 50 pulses per liter – 1 pulse = 0.02 l.
| HZ 5 DR | Factory Tested Version | Prod.-No. 89 315 008 |
Accessories HZ 5 / HZ 6 and HZ 5DR / HZ6 DR models
Attachment set – For installing an oil meter in the pressure line between the burner pump and the burner nozzle. Included in the set:
2 straight screw connections G 1/8 ″ cylindrical, galvanized steel, for 4 or 6 mm pipe outer diameter
2 straight screw connections (galvanized steel) – coupling
Connection 4 x 4 mm or 6 x 6 mm / new
2 pieces of reinforcement sleeve 6 x 1 / new
2 pieces of aluminum sealing rings according to DIN 7603
2 pieces of copper pipe sections outside diameter 4 or 6 mm,
Length 250 mm made of material CU-BHB R 250
1 piece perforated sheet blank made of aluminum, dimensions 1.5 x 50 x 240 mm
2 x M 4 x 6 mm fastening screws
2 washers MS
| 4 mm | Prod.-No. 79 900 740 |
| 6 mm | Prod.-No. 79 900 741 |
Straight screw connection
| R 1/8″ x 4 mm | Prod.-No. 39 400 456 |
| R 1/8″ x 6 mm | Prod.-No. 39 400 487 |
| R 1/8″ x 8 mm | Prod.-No. 39 400 457 |
| R 1/8″ x 10 mm | Art.-Nr. 39 400 458 |
Oil Meter HZ 5 DR | Remote Counters
- Connection via screw terminals
- Reed contact: max. 30 VDC,
Imax = 6 mA, Rs = 1.0K ohms /
0.6W (note polarity) - Principle: The circuit of a counter or other recording device connected to the plus and minus terminals is closed via the reed contact and 1.0 K-ohm resistor. In order for the additional counter to reach its switching threshold safely, the input resistance should be at least 50 KΩ.
- Pulse value:
- 1 pulse = 0.02l
- 50 pulses = 1l
- Maximum frequency at 60l / h approx. 1Hz (use remote counter due to reed contact [-Prellen-] with damped input)
Technical Data HZ 5 DR
| Flowraterange | 0,7 … 40 l/h (0,6 … 34 kg/h)
7 kW … 400 kW |
| Reading option on the oil meter | 0,01 l … 99999,98 l |
| Measuring accuracy | ± 1 % |
| Nominal pressure | 25 bar |
| Pressure loss (especially to be observed when installing in the Suction line!) | 0,05 bar … 0,2 bar |
| Type of heating oil | EL nach DIN 51603 |
| Temperature range / ambient temperature | –5°C … +70°C |
| Connecting thread | DIN 3852-X-G 1/8″ innen |
| Dimensions | 60 x 60 x 85 mm |
| Weight | 0,6 kg |
Oil Meter HZ 6 DR
For oil central heating – measuring range 1… 60 l / h – burner output 10… 600 kW
Oil Meter HZ 6 DR
Version with LCD digital display, built-in potential-free reed contact as “pulse generator”. 50 pulses per liter – 1 pulse = 0.02 l.
| HZ 6 DR | Factory Tested Version | Prod.-No. 89 316 008 |
Technical Data HZ 6 D
| Flowraterange | 1 … 60 l/h (0,8 … 50,4 kg/h) |
| Burner capacity | 10 kW … 600 kW |
| Reading option on the oil meter | 0,01 l … 99999,98 l |
| Measuring accuracy | ± 1 % |
| Rated pressure | 25 bar |
| Pressure drop (Pay particular attention when installing in the suction line!) |
0,05 bar … 0,2 bar |
| Types of heating oil | EL nach DIN 51603 |
| Temperature range / ambient temperature |
–5°C … +70°C |
| Connecting thread | DIN 3852-X-G 1/8″ innen |
| Dimensions | 60 x 60 x 85 mm |
| Weight | 0,6 kg |
